Зона аплоадеров » Программы » Autodesk Autocad Mep 2014 Sp1 (x86/x64)
Autodesk Autocad Mep 2014 Sp1 (x86/x64)
Добавил: vandit | 4-12-2013, 23:51 | Просмотров: 527 | Комментариев: 0
Autodesk Autocad Mep 2014 Sp1 (x86/x64)

Autodesk Autocad Mep 2014 Sp1 (x86/x64)

Autodesk Autocad Mep 2014 Sp1 (x86/x64) | 7.43 GB

AutoCAD MEP this is AutoCAD for the design of heating, ventilation, electrical and sanitary systems in buildings. The familiar AutoCAD-based environment provides a higher accuracy of the engineering systems. Automation drawing operations and collision detection function to help increase productivity and reduce errors. Support for the project during the construction of systems engineering and in other stages of the life cycle of the building is made possible by reliable technology DWG.

- Project Navigator - drawing management
Navigator simplifies the work with the drawings of the project, allowing you to create a coordinated views based on specified in the project settings . Detailed documentation of engineering systems as its foundation is organized in a binder . Everyone working on the project specialists only get access to the actual files - from project templates and ending with sections and elevations .
- Catalogues of special components
By using templates , you can create models of commercially manufactured air ducts, pipes and fittings. After transfer to AutoCAD MEP , these components are entered in the catalogs . The use of mass-produced components in piping and HVAC systems design improves accuracy .
- Setting the volume and trace pipeline
For inclined pipes and fittings can be used built-in tracing options . Trace settings for use specialized components and pipelines built for AutoCAD MEP. Supports the use of fittings with internal and external thread for a more realistic representation of pipelines.
- Dynamic input when dealing with the size of
AutoCAD MEP allows you to use dynamic typing when you add the wires , water pipes , ducts , cable ducts and trays , schematic lines . Dynamic input uses the same controls as in AutoCAD and AutoCAD Architecture.
Binding sites for AutoCAD MEP now on regardless of the object snap AutoCAD. To turn snapping AutoCAD MEP uses the keyboard shortcut Shift + F3, and to enable snapping AutoCAD continues to serve as press F3.

1. Produced by the union of four original distributions in one English x64 , x86 English , Russian x64 , x86 Russian .
2. In the installer adds the ability to set local help as for the English and Russian versions of the program.
3. In the installer adds the ability to install the module support VBA- macros.
4. In AutoCAD MEP installation package will integrate Service Pack 1.
5. In the installation package Autodesk will integrate 360 Live Update 3 for Autodesk 360 desktop companion.
6. In this assembly , in contrast to the original distributions , you can choose to install or not the package Autodesk 360.
7. Distributions used in the original package . NET Framework 4.0 is replaced by a revised version of the draft [Slim]. NET Framework 4.0 Full x86/x64, with built-in updates as of October 9, 2013 .
8. The combined installer is optimized so that the lost weight ~ 2.9 GB without losing functionality .
9. The assembly fits on a DVD9. In this case , if the image is deployed , for example, a USB flash drive , it takes ~ 8.6 GB.
10. It is possible to install AutoCAD MEP software on any supported language, and not only those that are sewn into the installer. Just download ofsayta language pack and the path to it during installation.
11. In this assembly is the language of the program is not chosen as usual, but in the console window before the installation (screenshot 1). This was done in order to keep all of the measurement system presented in the original distribution, but it does not burden the assembly. Language of the console window depends on the language of your operating system : on the Russian-language system, it Russian , all the rest - English. When you connect a third-party language pack as described in claim 10, the measurement system will be presented just for the language that was selected before you start the installation (screenshot 1).
12. The assembly is relieved of some of the problems arising when connecting through a virtual image of the drive , the installer will sometimes require a different drive .
13. A number of changes that will relieve the end user from problems during the installation, if the versions of Microsoft Visual C + + Redistributable and . NET Framework, used by the installer , different from the ones that are already installed on the system.
14. Everything you need for treatment, including detailed instructions , is located within the image in the folder Crack.

The procedure for treatment
- Start the installation using AutoCAD MEP 2014 111-11111111 , 222-22222222 or 333-33333333 as serial number , and 235F1 as the product code.
- Copy the desired crack ( 32- bit or 64 -bit ) from the Crack folder to your hard disk. Otherwise it will not work correctly .
- Break the connection to the network . To do this, either disconnect the power cable from the computer or the software interrupt the connection. In Windows 7 , for example, to program the connection is found in the system tray near the clock network connection icon , click on it , at the bottom of the pop-up window , select " Center Network and Sharing Center " in the window on the left , click on " Change adapter settings " to change the rules of the select in charge of your Internet connection , click the right mouse button and select " Disable . "
- Start the AutoCAD MEP 2014 and agree to the privacy statement . In the license , click the "Activate " (Activation), then in the window where you will be notified that " You must be connected to the Internet " (Internet Connection Required), click " Close " (Close) and confirm the cancellation of the operation. Re- opens licensing , where again you will have to click the "Activate " (Activation). In the next window, choose "I have an activation code Autodesk" (I have an activation code from Autodesk).
- As administrator , run the crack ( right-click on the file and choose from the drop down menu "Run as administrator" ) and click in the window keygens button Patch. You should see a window with the message "Successfully patched".
- In the keygen copy the code Request Request (Request Code) from the window of Licensing Autodesk. Then click the Generate button and the result of the field Activation keygens move in the activation code (Activation Code) window Licensing Autodesk. Click "Next " (Next). You should see a message about the successful activation of the product.
- NOTE : The generated code activation is slightly longer than the allotted under his field in the keygen . Try not to lose some characters when copying . But , also , I should note that this code is shorter than the space allocated for it in the box licensing Autodesk. In most cases , the Sixteenth field is left blank , and the fifteenth contains only one character. Activation , meanwhile, does not prevent .
- Restore the network connection is broken off earlier and Enjoy the registered version of the product!

System requirements:
For 32- bit version of AutoCAD MEP 2014
- Microsoft Windows 8 Standard, Enterprise or Professional, Windows 7 Enterprise, Ultimate, Professional or Home Premium, or Windows XP Pro or Home (SP3 or higher)
- For Windows 7 : Intel Pentium 4 or AMD Athlon dual-core processor with 3 GHz or higher with SSE2 support
- For Windows XP: Pentium 4 processor or AMD Athlon dual-core processor with a clock speed of 1.6 GHz or higher with SSE2 support
- 2 GB of RAM ( 4 GB recommended)
- 6 GB of hard disk space for installation
- Monitor with a resolution of at least 1024 x 768 and support the regime true color ( recommended resolution of 1600 x 1050 and above)
- Microsoft Internet Explorer 7.0 or higher
- To install : connect to the Internet or a DVD-ROM drive

For the 64 - bit version of AutoCAD MEP 2014
- Microsoft Windows 8 Standard, Enterprise or Professional, Windows 7 Enterprise, Ultimate, Professional or Home Premium, or Windows XP Pro (SP2 or higher)
- Processor AMD Athlon 64 , AMD Opteron, Intel Xeon with Intel EM64T support , or Intel Pentium 4 processor supporting Intel EM64T ( all - with support for SSE2)
- 2 GB of RAM ( 4 GB recommended)
- 6 GB of hard disk space for installation
- Monitor with a resolution of at least 1024 x 768 and support the regime true color ( recommended resolution of 1600 x 1050 and above)
- Internet Explorer 7.0 or higher
- To install : connect to the Internet or a DVD-ROM drive

Additional requirements for 3D modeling (all configurations)
- Pentium 4 or Athlon processor with a clock frequency of 3 GHz or higher, or Intel or AMD dual core processor with a clock frequency of 2 GHz or higher
- At least 4 GB of RAM
- Optional 6 GB hard drive, in addition to free space required for installation.
- Video adapter class workstations with the memory of at least 128 MB, supports screen resolution of 1280 x 1024 mode, true color, Pixel Shader 3.0 or higher and Microsoft Direct3D






Категория: » Программы
Теги: Autodesk, Autocad

Посетители, находящиеся в группе Гости, не могут оставлять комментарии к данной публикации.